To measure color, a color measurement device shines light onto a sample, captures the amount of light that is transmitted or reflected in the 380 nm to 780 nm wavelength range, and quantifies it as a spectral measurement. Color measurement is necessary to specify, quantify, communicate, formulate, and verify color quality for color critical work. Because everyone perceives color differently, color measurement is more precise than visual evaluation. What is a Color Measurement Device? There are t...

Posted August 24, 2021 by X-Rite Color

Learn more about light, reflection curves, optical brighteners, and more.     Illuminants Electro magnetic radiation in the wavelength range from 380 nm to 730 nm is seen as light by our eyes. Low wavelengths show as blue light. Then the spectrum continues from green, yellow, orange to red. UV radiation is located in the range below 380 nm; the range above 730 nm is called infrared radiation. The visual impression of a colored body changes by the composition of the incoming light. ...

Posted July 22, 2021 by X-Rite Color

ICC color management means having a workflow that is predictable, consistent, and repeatable from capture through proofing to final output. To achieve a color managed workflow, you need to calibrate your devices and create an ICC profile for every component, including the camera, monitor, projector, scanner, and printer.   Why Calibrate and Profile? For the best color results, you need to calibrate each device that is contributing to your workflow to ensure it is accurately reproducing colo...

Posted January 27, 2021 by Ray Cheydleur

Especially in the print industry, checking color quality at multiple steps along the way is the key to ensuring you’re on the right track. Without print color management, you can end up producing something you think is right, but is completely wrong in the end. Managing color in the pressroom closes the gap between expectations, press operators, specifications, and color to ensure good quality.  During design, it means accurately specifying colors for reproduction on the ...

Posted September 14, 2020 by X-Rite Color

How much time, paper, and ink do you waste re-printing images because the color isn’t right? Before you blame your printer, consider your monitor. When you work on an un-calibrated monitor, you can’t trust the colors you see on-screen, making it hard to make good editing decisions. Luckily, monitor calibration is a breeze with i1Profiler software. Wizard-based, it walks you through every step in the profiling process. Basic and advanced modes allow you to modify your settin...

Posted August 20, 2020 by Mark Gundlach

Softproofing – the ability to simulate how an image will appear in print right from your monitor – can save a lot of time and effort in your printing workflow. Although many photographers already rely on it, anyone who designs, approves, prepares or prints brand and color-critical images can also benefit. With softproofing, designers can create with actual specified colors (no more trial and error!), project owners can approve layouts without physical proofs (predictable color!), and...

Posted August 20, 2020 by Mark Gundlach

As brand owners compete to make packaging stand out, commercial and flexible packaging converters and label printers are charged with achieving accurate color – on unique substrates – with shorter print runs. Many spend a lot of time mixing ink, then end up throwing it away when the color isn’t right. Others mix ink, store it, and spend way too much time trying to reuse it for future print runs.  If you’re stuck in this cycle, you’re essentially paying for ink...

Posted August 13, 2020 by Rich Knapp

Whether you’re producing textiles, automotive parts, or plastic pieces, color needs to remain consistent or the final product will be rejected. Unfortunately, there are many ways for color errors to creep in during manufacturing. Creating and using accurate digital color standards is one way to combat these errors. Digital color standards can be used in software to specify and communicate color, formulate colorants and raw materials, and control color quality. They give brand owners peac...

Posted August 03, 2020 by Tim Mouw

Spectrophotometers (“spectros” for short) are color measurement devices used to capture and evaluate color. As part of a color control program, brand owners and designers use them to specify and communicate color, and manufacturers use them to monitor color accuracy throughout production. Spectrophotometers can measure just about anything, including liquids, plastics, paper, metal and fabrics, and help ensure that color remains consistent from conception to delivery.   &nb...

Posted March 27, 2020 by X-Rite Color

Does your quality control program include visual evaluation? Lighting plays a huge role in how we perceive color. It can help you verify whether the color of your product is acceptable and ensure it remains accurate in every possible lighting condition after purchase.     Many of our customers are finding visual evaluation to be even more important as they transition color reviews and approvals to a different location, such as in the home office or to another remote environmen...

Posted March 27, 2020 by X-Rite Color

Color has always been a critical factor for our customers. Due to the COVID-19 pandemic, many are now trying to design, specify, communicate and ultimately achieve accurate color from remote locations or with less staff and fewer resources. Are you having trouble maintaining your color program in this unprecedented time?  We've compiled our most popular resources – blogs, videos, whitepapers, webinars, and case studies – to help you connect with your supply chain and ...

Posted March 27, 2020 by X-Rite Color

Posted March 25, 2020 by X-Rite Color

In my recent blog I explained why the demand for printed fabrics is increasing and the challenge this poses for the digital print industry. Today, with help from Digital Imaging Expert Scott Martin of Onsight, I will share tips and tools to help printers profile textiles for a consistent digital workflow.  While smooth textures can often be measured using traditional digital tools, fabrics with texture or specular reflections (like coated canvases) can cause issues. It&...

Posted January 28, 2020 by Ray Cheydleur

Durable goods and consumer electronics are no longer destined to be white, gray, and black. In fact, consumers are moving towards more classic colors and special effect finishes like metallics. To capitalize on this trend, brands need to bring innovative designs in new colors faster to market than ever before.   One trending color, the PANTONE Color of the Year 2020, is sure to capture the attention of durable good and consumer electronic brands. It is a simple, timeless, elegant, and endur...

Posted December 09, 2019 by X-Rite Color

X-Rite’s inline color measurement solutions help industries manage color as the product is being made. Inline systems monitor products as they are produced and alert operators as soon as color begins to move out-of-spec so corrections can be made before the product is wasted. The ERX145 spectrophotometer mounted on a traversing beam is automatically measuring the left, middle and right side of this sheet during production. Each X-Rite inline color measurement system uses a non-contact s...

Posted December 02, 2019 by Greg Stehn

The eXact is a handheld spectrophotometer with an intuitive touchscreen interface. Printers and packaging converters use it to control, manage, and communicate color from anywhere on the pressroom floor. It comes in a variety of models to fit every customer need, and can be upgraded as those needs change. With so many to choose from, it can be hard to know which eXact model is right for you. Today’s blog can help you decide. Explore by eXact Model eXact Basic Densitometer: If...

Posted November 07, 2019 by Keal Harter

Inter-instrument agreement is a very important consideration when selecting color measurement devices for your workflow. Unfortunately, it’s such a technical topic that it leads to a lot of confusion about what it means and why it’s important. The Ci7860 sphere benchtop spectrophotomter is has an inter-instrument agreement specification of 0.06 average Delta E*, enabling brands to create the most precise master color standards. Today we’re making it as simple as possibl...

Posted October 03, 2019 by Mike Huda

Spectrophotometers are excellent tools for measuring samples against their color standards to compare differences, but it can be difficult to achieve color accuracy for irregularly shaped products like liquids, plastics, cans, and powders. We design a variety of parts and accessories - also called “rigs & jigs” - for many of our instruments to help measure odd shapes and sizes.  Parts & Accessories for Benchtop Spectrophotometers Liquids are notoriously difficult ...

Posted October 02, 2019 by Mike Huda

Spectrophotometers are color measurement devices that measure color to ensure it remains consistent from the time it’s specified until final quality check. They can be used to measure everything from liquids and plastics to paper, metal, and fabrics for just about every industry.   Here Are Our Top Spectrophotometer Picks for 2019.   Best Spectrophotometer to Create Digital Standards Using a digital standard is the most accurate way to specify and communicate color, des...

Posted August 16, 2019 by X-Rite Color

Each color has its own appearance based on three key attributes – hue, chroma (saturation), and value (lightness). When you’re describing a color, it’s important to use all three of these attributes to accurately identify the color and distinguish it from others.  What is hue? Hue is defined as how most of us perceive and name a color – using the colors of the rainbow (red, orange, green, blue, etc.). Reference the color wheel, below, to see how colors shift from one...

Posted August 15, 2019 by X-Rite Color
View more

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042