Printing using extended gamut process colors allows for a broader color gamut – CMYK PLUS Orange, Green and Violet. By adding these three additional base inks into the process, you can achieve a much closer match to traditional formulated spot ink colors. For example, orange will look truer and cleaner when orange ink is used, rather than mixing yellow and magenta to achieve a suitable match. Read more about how the PANTONE® EXTENDED GAMUT Guide helps printers here. Good: CMYK &nb...

Posted February 09, 2018 by Mark Gundlach

In a perfect world, you should be able to put ink in the press and simply run a job. Unfortunately, every year flexo and gravure printing operations waste ink, substrate and press time trying to get color right. Although advancements in technology have made it easier to achieve color accuracy, the variables that affect color still exist. In this three-part series, we’re sharing over two dozen reasons your color might be wrong on press. We’ve already covered two important factors – Instrumentatio...

Posted April 19, 2017 by Scott Harig

In a perfect world, you should be able to put ink in the press and simply run a job. Unfortunately, every year flexo and gravure printing operations waste ink, substrate and press time trying to get color right. Although advancements in technology have made it easier to achieve color accuracy, the variables that affect color still exist. In this three-part series, we’re sharing over two dozen reasons your color might be wrong on press. If you missed the first article – Instrumentati...

Posted March 30, 2017 by Scott Harig

In a perfect world, you should be able to put ink in the press, run a job, and achieve color consistency. Unfortunately, every year flexographic and gravure printing operations waste ink, substrate, and press time trying to get color right. Although advancements in technology have made it easier to achieve color accuracy, the variables that affect color still exist. In this three part series we’ll share over two dozen reasons your color might be wrong at press side. Today’s topic looks at issue...

Posted March 19, 2017 by Scott Harig

As the range of substrates, inks, and printing technologies has expanded, so has the challenge of maintaining color quality. A workflow based on digital standards is the easiest way to achieve accuracy and consistency across shifts and sites, regardless of production requirements. Adding a quality control solution like ColorCert® to your workflow can boost your bottom line even more. ColorCert provides specific modules focused on each part of the workflow, helping flexo, gravure, and offset prin...

Posted August 03, 2016 by Mark Gundlach

If you use eXact with BestMatch™, the answer might be yes. BestMatch helps you determine if you can achieve a closer match to a specified color by adjusting ink on press. Formulating ink for a press run can be tricky because there are many things that go into it. The vehicle, colorants, and solvents are just a few of the things that impact ink quality, and whether it comes from your ink supplier or you mix it yourself, ink can vary in thickness or concentration. With BestMatch, you can confirm t...

Posted November 03, 2015 by Scott Harig

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042