Instrument Settings following a factory reset - new 900's

A factory reset will restore the following defaults to the 962 and 964 instruments:

• Language - English

• Measure Options…

  • Store Samples - Off
  • Pass/Fail - Off
  • Auto Std - On
  • Averaging - 1
  • Diff Display - Off

• Color Options

  • Active Functions… - L*a*b*, L*C*h, dE* and dEcmc
  • Active Illum/Obs… - A/10, D65/10, and F2/10
  • Opacity Menu
    • Data Display - Color
    • Set k1 - 0.04
    • Set k2 - 0.60
  • Strength Options
    • Method - Apparent
    • Predicted - @ 100%
  • Metamerism Menu
    • Mode - MI (not the DIN method)
    • Ill/Obs1 - D65/10
    • Ill/Obs2 - F2/10
  • dEcmc Factors
    • Lightness - 2.00
    • Chromaticity - 1.00
  • dE94 Factors
    • Lightness - 2.00
    • Chromaticity - 1.00
  • Shade Sort - Off

• Database Tools

  • View Tags
    • In View Tag screen, should be there as all tags were deleted.

• Hardware Settings

  • Serial Port Options
    • Baud Rate - 9600
    • Handshake - Off
    • Auto XMT - Off
    • Separator - Comma
    • Delimiter - CRLF
    • Set Data Types… - Only Colorimetric should be active
    • Header - On
    • Std Printout - On
    • Emulation - Off
  • Read Operation - Switch Only (meaning the switch activated by the foot/shoe)
  • Cal Timeout - 24 hrs
  • Power Down - 120 sec
  • Beeper - Loud
  • Clock Adjustments
    • Date Format - M/D/Y
    • The actual time readings are not affected by factory presets
  • Display
    • Contrast - 52
    • Orientation - Right
    • Security - Off
    • Error Log… - does not get cleared out, should hopefully be

All of the preceding items can be manually edited via the instrument's "Configuration Menu".  The following also occurs:

• All databases will be cleared out, this includes all Samples, Standards, Projects, strings, tags, and jobs.
• L*a*b* and D65/10 will be the default selects in QA/Analyze…etc
• Reflectances stored from the last measurement will all be 0's.
• Calibration will be required before any measurements can be done.
• Upon Calibration for the first time after a reset, the black cal will most likely complain about dust, and require a second reading.

Things that will never change due to the Factory Presets being loaded:

•  Calibration plaque values in all aperture sizes configured
• Center wave lengths
• Instrument Type (962, 964), instrument serial #, Cal plaque serial #.
• Initial Cell Strength values (included, excluded, and wall)