ColorChecker Passport Lightroom Plugin Is Missing
Sometimes the ColorChecker Passport Lightroom plugin fails to install with the ColorChecker software installation.On a Mac...
First, make sure that you are using the current ColorChecker Camera Calibration 2.2.0. If needed, download ColorChecker Camera Calibration 2.2.0 from the following link:
https://www.xrite.com/service-support/downloads/c/colorchecker_camera_calibration_v2_2_0
After it downloads it will unzip to a package. Right-click on the package file, select "Open" and "Continue" to launch the installer. Reboot the computer after the installation completes and open ColorChecker Camera Calibration.
If the Passport Lightroom Plugin is not installed to “File” > “Export” menu in Lightroom after installing ColorChecker Camera Calibration 2.2.0, please see the following instructions to manually load your ColorChecker plug-in into Lightroom:
1. Open an image in Lightroom and select “File” > “Export”
2. Click on “Plug-in Manager” in the lower left corner.
3. Click “Add” in the lower left corner.
4. Make sure that the “Macintosh HD” is selected at the top of this navigation window and then navigate to Library > Application Support > Adobe > Lightroom > Modules
5. Select “XRiteColorCheckerCameraCalibration.lrplugin” and then click on “Add Plug-in”
6. The Passport plug-in should now be listed as installed and running. Select “Done” in the lower right to complete the process. (You will need to close Lightroom and then re-launch before you can use it.)If you do not see the plugin listed at all in your Manager then you will need to add it manually by following these steps:
On a PC...
If the Passport Lightroom Plugin is not installed to “File” > “Export” menu in Lightroom after installing CC Camera Calibration 2.2.0, please see the following instructions to manually load your ColorChecker plug-in into Lightroom:
1. Open an image in Lightroom and select “File” > “Export”
2. Click on “Plug-in Manager” in the lower left corner.
3. Click “Add” in the lower left corner.
4. Navigate to: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Modules
5. Select “XRiteColorCheckerCameraCalibration.lrplugin” and then click on “Add Plug-in”
6. The Passport plug-in should now be listed as installed and running. Select “Done” in the lower right to complete the process. (You will need to close Lightroom and then re-launch before you can use it.)
First, make sure that you are using the current ColorChecker Camera Calibration 2.2.0. If needed, download ColorChecker Camera Calibration 2.2.0 from the following link:
https://www.xrite.com/service-support/downloads/c/colorchecker_camera_calibration_v2_2_0
After it downloads it will unzip to a package. Right-click on the package file, select "Open" and "Continue" to launch the installer. Reboot the computer after the installation completes and open ColorChecker Camera Calibration.
If the Passport Lightroom Plugin is not installed to “File” > “Export” menu in Lightroom after installing ColorChecker Camera Calibration 2.2.0, please see the following instructions to manually load your ColorChecker plug-in into Lightroom:
1. Open an image in Lightroom and select “File” > “Export”
2. Click on “Plug-in Manager” in the lower left corner.
3. Click “Add” in the lower left corner.
4. Make sure that the “Macintosh HD” is selected at the top of this navigation window and then navigate to Library > Application Support > Adobe > Lightroom > Modules
5. Select “XRiteColorCheckerCameraCalibration.lrplugin” and then click on “Add Plug-in”
6. The Passport plug-in should now be listed as installed and running. Select “Done” in the lower right to complete the process. (You will need to close Lightroom and then re-launch before you can use it.)If you do not see the plugin listed at all in your Manager then you will need to add it manually by following these steps:
On a PC...
If the Passport Lightroom Plugin is not installed to “File” > “Export” menu in Lightroom after installing CC Camera Calibration 2.2.0, please see the following instructions to manually load your ColorChecker plug-in into Lightroom:
1. Open an image in Lightroom and select “File” > “Export”
2. Click on “Plug-in Manager” in the lower left corner.
3. Click “Add” in the lower left corner.
4. Navigate to: C:\Users\UserName\AppData\Roaming\Adobe\Lightroom\Modules
5. Select “XRiteColorCheckerCameraCalibration.lrplugin” and then click on “Add Plug-in”
6. The Passport plug-in should now be listed as installed and running. Select “Done” in the lower right to complete the process. (You will need to close Lightroom and then re-launch before you can use it.)
