To measure color, a color measurement device shines light onto a sample, captures the amount of light that is transmitted or reflected in the 380 nm to 780 nm wavelength range, and quantifies it as a spectral measurement. Color measurement is necessary to specify, quantify, communicate, formulate, and verify color quality for color critical work. Because everyone perceives color differently, color measurement is more precise than visual evaluation. What is a Color Measurement Device? There are t...

Posted August 24, 2021 by X-Rite Color

Learn more about light, reflection curves, optical brighteners, and more.     Illuminants Electro magnetic radiation in the wavelength range from 380 nm to 730 nm is seen as light by our eyes. Low wavelengths show as blue light. Then the spectrum continues from green, yellow, orange to red. UV radiation is located in the range below 380 nm; the range above 730 nm is called infrared radiation. The visual impression of a colored body changes by the composition of the incoming light. ...

Posted July 22, 2021 by X-Rite Color

2020 forced manufacturers to rethink the way they work. Around the globe, COVID put a hard stop on the travel required to approve prototypes and delayed the shipment of physical samples. Many brands started looking for ways to use digital color samples to keep production moving but struggled with the inability to replicate how a color sample would look on a prototype.   The PANTORA desktop application closes this gap. With PANTORA, users can capture or import spectral samples and store, man...

Posted March 16, 2021 by Matthew Adby

To establish a successful quality control program, you need good instrumentation, robust software, and trained users. But even with everything in place, there are some common pitfalls to watch for when using a spectrophotometer to analyze color quality. Measuring plastic parts with the X-Rite Ci7800 benchtop spectrophotometer. Top Five Color Measurement Pitfalls  1. Bad Standards and Samples Physical standards and samples don’t last forever. Careless handling and dirty devices can ...

Posted August 11, 2020 by Tim Mouw

Whether you’re producing textiles, automotive parts, or plastic pieces, color needs to remain consistent or the final product will be rejected. Unfortunately, there are many ways for color errors to creep in during manufacturing. Creating and using accurate digital color standards is one way to combat these errors. Digital color standards can be used in software to specify and communicate color, formulate colorants and raw materials, and control color quality. They give brand owners peac...

Posted August 03, 2020 by Tim Mouw

Whether you work with plastics, coatings or textiles, you must consistently achieve in-tolerance color or your product could be rejected before it even makes it to the shelf or showroom.     This is especially true for brands that rely on off-site suppliers and manufacturers for raw materials and parts that come together at assembly, such as the plastic dashboard, fabric seats, and coated interior panels of a car. Even if each site produces in-tolerance color, it must be monitored an...

Posted June 12, 2020 by Tim Mouw

Il tuo programma di controllo qualità comprende la valutazione visiva? L’illuminazione ha una funzione fondamentale nel modo in cui percepiamo i colori. Può aiutarti a verificare l’accettabilità del colore dei tuoi prodotti e a fare in modo che rimanga accurato in ogni possibile condizione d'illuminazione a cui sarà sottoposto dopo l’acquisto.     Per molti dei nostri clienti ora la valutazione visiva è ancor più importante, considerato che le analisi e le approvazioni dei colori v...

Posted March 27, 2020 by X-Rite Color

Il colore è sempre stato un elemento fondamentale per i nostri clienti. A causa della pandemia da COVID-19, molte persone stanno ora cercando di progettare, specificare, comunicare e infine realizzare colori accurati da postazioni remote o utilizzando meno personale e minori risorse. Ti è difficile proseguire il programma di qualità del colore in questo momento senza precedenti?  Abbiamo raccolto le nostre risorse più apprezzate – blog, video, white paper, webinar e case study – per a...

Posted March 27, 2020 by X-Rite Color

Managing color throughout production is always a challenge, but advances in color technology, like the metallic, shimmer, and pearlescence effects designed to capture consumer attention, are taking the frustration to a whole new level for quality control managers. This is especially true when producing parts that must match at assembly, such as the metal panels for a home appliance or the painted side mirrors for a vehicle.  Special effects are tricky to control because our perception can c...

Posted January 14, 2020 by Tim Mouw

When it comes to the way we see color, our eyes can be deceived. This is partially caused by our humble brain, which is managing vast amount of information and processing it the best it can. It can also be related to genetics and the environment; we all see color a little differently. But above all, LIGHT has biggest impact on the colors we see.  Without getting too technical, here is an introduction to the way light affects our perception of color. RGB Color Circle The temperature of lig...

Posted January 06, 2020 by X-Rite Color
View more

Domande? Vi serve un preventivo? Contattateci(888) 800-9580