Contact Sales/Support: +1 (888) 800-9580

The best way to visualize how color will react in real world lighting conditions is to use a light booth. Traditional light booths contain common illuminants like daylight, incandescent, and fluorescent to replicate how color will look in the retail store and post-purchase in outdoor and home lighting. Today, the increased use of LED lamps in home, commercial, and retail environments is impacting decades of standardized lighting procedures.   How LED is Changing the Game LED lights hav...

Posted August 09, 2019 by X-Rite Color

With so many requests for innovative bases, transparency, and special effects, formulating color for paint, coating, and plastic applications can be a challenge. To keep up, formulation software needs to be innovative, too. We recently launched version 10 of our Color iMatch formulation software, and it is our smartest version yet. It allows you to select cost-reducing parameters, such as lowest cost or fewest colorants, and will determine the best formula for your application. It work...

Posted July 10, 2019 by Rich Knapp

Are you wasting too much time and money on incorrect color? Even if you use the best color measurement tools available, your color will still fail without quality control.    Quality control (QC) means verifying the color you specify is the same color you manufacture, throughout production. Setting up a QC program can help you accurately communicate color with clients and suppliers, inspect raw materials before you begin working, and verify your color is correct before you ship.  ...

Posted June 27, 2019 by Tim Mouw

As we move through spring and into summer, we’re revisiting Pantone Color Institute’s Spring/Summer 2019 Fashion Color Trend Report. This season’s report features the top 12 stand out colors as well as current takes on four classic neutrals.    Images extracted with permission from PANTONEVIEW Colour Planner Spring/Summer 2019.    According to Leatrice Eiseman, Executive Director of the Pantone Color Institute, “This new mindset underscores a...

Posted June 10, 2019 by X-Rite Color

The environmental footprint of fashion is out of control. According to the National Resources Defense Council (NRDC), “Textile mills generate one-fifth of the world's industrial water pollution and use 20,000 chemicals, many of them carcinogenic, to make clothes.” Fabric being dyed in factory. Image from NRDC.org.  A Problem That Impacts Everyone Did you know it takes about 200 tons of water (enough to fill several swimming pools) to produce one ton of cott...

Posted May 29, 2019 by X-Rite Color

Your customer rejected your latest shipment due to color.  You checked the color before you sent it and it passed tolerance…  You did everything the same way last time and it passed tolerance…  So why did it get rejected now? We get this question from our customers all the time.  The Dreaded “Error Stack” Color rejections create waste and increase production costs. Unfortunately, there are a lot of variables that contribute to the color you produce,...

Posted March 07, 2019 by Tim Mouw

If you only measure color on opaque substrates and painted parts, the Ci7500 benchtop spectrophotometer might be a good choice for you. The newest member of our Ci7x family, this unit is a mid-range benchtop spectrophotometer that only measures in reflectance mode. Today we’ll explain the difference between transmission and reflectance measurements so you can determine if the new Ci7500 can meet your color measurement needs, or if you need a device that can also measure...

Posted February 26, 2019 by Mike Huda

For the last few Decembers, we’ve provided you with a list of “top color measurement blogs” for that respective year. As we reviewed this year’s list, we noticed that your favorite/ the most-read blogs could be categorized into a few buckets. So, without further ado, here’s 2018’s top blog topics!  2018’s Most Popular Color Measurement Topic: Tolerancing Not to our team’s surprise, Tolerancing – what it is/what it means for your busines...

Posted December 20, 2018 by X-Rite Color

Each year, Pantone announces its highly anticipated “Color of the Year”. The selection is intended to serve as a strategic direction for design and color-conscious industries as well as a conversation piece around our culture, where it is going and what we collectively need…and it certainly gets everyone talking about color!  Color is no longer just something we see and appreciate - it enhances and influences the way we experience life. Color, as a strategic element of d...

Posted December 06, 2018 by Tim Mouw

Like geographic coordinates – longitude, latitude, and altitude – L*a*b* color values give us a way to locate and communicate colors. What’s the history of L*a*b*? In the 1940’s, Richard Hunter introduced a tri-stimulus model, Lab, which is scaled to achieve near uniform spacing of perceived color differences. While Hunter’s Lab was adopted as the de facto model for plotting absolute color coordinates and differences between colors, it was never formally accepted as...

Posted October 08, 2018 by Tim Mouw

When it comes to the way we see color, our eyes can be deceived. This is partially caused by our humble brain, which is managing vast amount of information and processing it the best it can. It can also be related to genetics and the environment; we all see color a little differently. But above all, LIGHT has biggest impact on the colors we see.  Without getting too technical, here is an introduction to the way light affects our perception of color. RGB Color Circle The temperature of lig...

Posted July 19, 2018 by Shoshana Burgett

Warm weather is just around the corner and spring is in the air!   Fluffy yellow chicks…   Delicate pink tulips…   Soft green sprouts poking through the ground…   And, of course, spring M&M'S®! Advertisers target our springtime emotions through pastel colors. Pastels have a calming effect, and everywhere you look companies are using them to feed our desire to feel a bit of spring. Today we’ll take a look at the psychology of color, how marke...

Posted March 19, 2018 by Shoshana Burgett

When customers are just getting started with color management, they often ask, "What is the difference between a spectrometer and a spectrophotometer?". With such a minute spelling difference, it's easy to make a quick typo and get the wrong answer for this color question. So...what's the difference? Spectrometers vs. Spectrophotometers    What is a Spectrophotometer? A spectrophotometer is a color measurement device that is used to capture and evaluate color on just about anything, in...

Posted March 05, 2018 by X-Rite Color

Using a light booth to visually judge color is a great start to a successful color evaluation program. It allows you predict how color will look under multiple light sources so there won’t be any color surprises when the light changes over the life of the product. Introducing a color measurement device to capture spectral data is the next logical step. For a really great color program, you need to use both a light booth AND a spectrophotometer. This dynamic duo offers benefits you can&rsqu...

Posted December 18, 2017 by Mike Huda

Recently we blogged about how appearance affects color. In this article we look at some of the characteristics that impact an object’s appearance, such as texture, gloss, transparency, and special effects, and explain why it’s crucial to describe appearance in the early stages of the design workflow.  While 3D programs have attempted to address appearance aspects for years, there has been a missing link in virtual product design: the ability to integrate characteristically &ldqu...

Posted November 29, 2017 by Thomas Meeker

Whether purchasing a new car, consumer electronics, or household appliances, color consistency influences the perception of quality. If the color doesn’t match from front-to-back and side-to-side, customers will likely question the quality and move on. That’s where color measurement can help. In today’s competitive marketplace, manufacturers are going beyond color to utilize extreme effect finishes to differentiate their products. But, as manufacturers are quickly learning, me...

Posted October 25, 2017 by Thomas Meeker

Appearance is more than simply color. It’s a comprehensive look at everything inherent to each unique material we come in contact with, including texture, gloss, transparency, and special effects. Each of these characteristics plays a part and has an effect on overall appearance and understanding in relation to a single material. Objects may have several elements that affect appearance, such as the material’s surface texture, construction, overall geometry and micro-surface. The environ...

Posted October 24, 2017 by Thomas Meeker

The World Series starts next week. While players and fans are gearing up for the big event, stadium groundskeepers are preparing, too. You’ve surely seen those meticulous patterns in the grass – crisscross, spiral, plaid – but do you know how the groundskeepers create them? Thanks to a phenomenon called geometric metamerism (aka gonio-appearance), the grass really is greener on the other side. Read on to learn more about this optical illusion that can trick your eyes and wreak havoc on y...

Posted October 17, 2017 by Mike Huda

Color is our perception of reflected light across the visible spectrum. When light hits an object, it absorbs some rays and reflect others. The color of light that reflects back into our eyes is the color we perceive. The more light an object absorbs, the darker it appears. With black, very little light is reflected. Pure black in the presence of light wasn’t achieved until 2014 when Surrey NanoSystems announced the invention of Vantablack. This high-tech artificial substance absorbs 99....

Posted October 13, 2017 by Mike Huda

Whether you manufacture plastics, coatings, or textiles, the reality is the same: If you don’t achieve consistent color, your product won’t sell. In fact, at the shelf, most people decide whether they’re going to purchase a product within 90 seconds, and much of that decision is based on color. We know it can feel overwhelming to make changes to your production workflow, especially if you think it’s “good enough.” But the industry is changing. Brands are dema...

Posted October 03, 2017 by Tim Mouw
View more

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042