Vous affirmez que la couleur est importante, mais savez-vous pourquoi ? En réalité, la couleur est un élément essentiel du processus de fabrication. Malheureusement, de nombreux fabricants réalisent qu’il est aujourd’hui beaucoup plus compliqué d’obtenir une couleur correcte, alors que les marques qu’ils accompagnent leur exigent de respecter des tolérances toujours plus strictes. En voici les raisons. Si les progrè...

Posted November 01, 2022 by Cindy Cooperman

L’année 2020 a obligé les fabricants à repenser leur façon de travailler. Dans le monde entier, la crise COVID a freiné les déplacements nécessaires à l’approbation des prototypes et a retardé les expéditions d’échantillons physiques. De nombreuses marques ont commencé à chercher des moyens d’utiliser des échantillons de couleurs numériques pour assurer la continuit&ea...

Posted March 16, 2021 by Matthew Adby

Whether you work with plastics, coatings or textiles, you must consistently achieve in-tolerance color or your product could be rejected before it even makes it to the shelf or showroom.     This is especially true for brands that rely on off-site suppliers and manufacturers for raw materials and parts that come together at assembly, such as the plastic dashboard, fabric seats, and coated interior panels of a car. Even if each site produces in-tolerance color, it must be monitored an...

Posted June 12, 2020 by Tim Mouw

Mesure de la couleur en ligne pour les secteurs du papier, du textile, du plastique, du coil coating et du verre Les solutions de mesure de la couleur en ligne d’X-Rite permettent aux fabricants de divers secteurs d’évaluer la précision et la régularité de la couleur tout au long de la production et de suivre la conformité à la norme ISO. Les systèmes en ligne surveillent la couleur au fur et à mesure de la fabrication des pro...

Posted December 02, 2019 by X-Rite Color

Bien que les professionnels du plastique gèrent les problèmes de couleur dans le flux de production depuis de nombreuses années, la dynamique évolue à nouveau. De l’électronique grand public aux pièces automobiles et aux emballages souples, un nombre croissant de marques intègrent des finitions à effets spéciaux dans leurs produits. Si des rendus métallisés ou nacrés et d’autres effets complexes sont magnifiques et mettent les marques en valeur en rayon, ils n’en présentent pas moins de nouvell...

Posted October 03, 2019 by Thomas Meeker

Spectrophotometers are color measurement devices that measure color to ensure it remains consistent from the time it’s specified until final quality check. They can be used to measure everything from liquids and plastics to paper, metal, and fabrics for just about every industry.   Here Are Our Top Spectrophotometer Picks for 2019.   Best Spectrophotometer to Create Digital Standards Using a digital standard is the most accurate way to specify and communicate color, des...

Posted August 16, 2019 by X-Rite Color

Controlling color on cylindrical-shaped items like cups, cans, and tubes is a challenge because it’s hard to properly align the measurement device with the sample. Many printers and manufacturers cut a piece from the finished product and lay it flat to take a measurement. While this method works, each sample takes time to cut, wastes product, and risks the safety of the employees who are cutting the samples.  A Faster, Safer Solution X-Rite’s Cup and Cylinder Fixture works ...

Posted July 17, 2019 by Bob Binder

With so many requests for innovative bases, transparency, and special effects, formulating color for paint, coating, and plastic applications can be a challenge. To keep up, formulation software needs to be innovative, too. We recently launched version 10 of our Color iMatch formulation software, and it is our smartest version yet. It allows you to select cost-reducing parameters, such as lowest cost or fewest colorants, and will determine the best formula for your application. It work...

Posted July 10, 2019 by Rich Knapp

Are you wasting too much time and money on incorrect color? Even if you use the best color measurement tools available, your color will still fail without quality control. Quality control (QC) means verifying the color you specify is the same color you manufacture, throughout production. Setting up a QC program can help you accurately communicate color with clients and suppliers, inspect raw materials before you begin working, and verify your color is correct before you ship.   Five Impor...

Posted June 27, 2019 by Tim Mouw

Benchtop spectrophotometers measure in either transmission or reflectance mode to capture and quantify color on various opaque, transparent, and translucent samples, including glass, liquid, fabric, and plastic. Today we’ll explain the difference between transmission and reflectance measurements so you can determine which benchtop will meet your color measurement needs.  Transmission vs. Reflectance Measurements Both transmission and reflectance spectrophotometers emit all of the wav...

Posted February 26, 2019 by Mike Huda

We frequently get calls from customers who can’t figure out why their measurements vary, even when they’re using maintained devices. Why would a sample read one way one day, then slightly different another? Many times the culprit is thermochromaticity, and it becomes an even bigger problem as the seasons change. Every kind of material changes color with temperature. These changes cause the material to exhibit a shift in reflected wavelengths of light, which can alter our perception....

Posted September 19, 2017 by Mike Huda

Did you read our blog: Are You Using The Right Tolerancing Method? If not, check it out. Today we’re taking the topic one step further to investigate how tolerances are chosen in different industries. A pass-fail tolerance is the amount of color variation that is considered commercially acceptable. In part, tolerances are driven by customer expectations. While color tolerances are very tight in the automotive, plastics, and paint & coatings worlds, they can be much less strict in other...

Posted May 02, 2017 by Mike Huda

As we close out 2016, it’s time to look ahead to 2017 and the upcoming manufacturing trends that will influence how we do business in the New Year. With rapidly changing technology, it’s difficult to know exactly what’s coming next, but we can definitely make some predictions. Over the past year, I have interviewed many customers across a variety of manufacturing industries to learn more about their industry concerns, the design and manufacturing challenges they face, and the t...

Posted January 09, 2017 by Shoshana Burgett

K 2016 begins today in Düsseldorf and runs through October 26th. As the #1 trade fair for the plastics and rubber industries, it’s a huge event featuring industry news, product demos, and networking. We’ll be in Hall 8b / Stand H65 showcasing our end-to-end X-Rite Pantone workflow solutions to help rubber manufacturers, compounders, masterbatchers, and converters get consistent color in a plastics workflow. Don’t miss your chance to speak with our color experts! (Here...

Posted October 18, 2016 by X-Rite Color

Win an iPad! NPE 2015, The International Plastics Showcase, will be held in Orlando, Florida from March 23 through the 27th. It’s a great opportunity to learn about current trends and see live demonstrations of the latest technologies from every sector of the plastics industry. With more than 400 exhibits, it’s expected to be the biggest plastics showcase ever and a great chance to get up-close and personal with product experts in your field. X-Rite and Pantone are thrilled to once again be part...

Posted March 19, 2015 by X-Rite Color

Des questions ? Besoin d’un devis ? Nous contacter(888) 800-9580