In a highly competitive marketplace, brands and packaging designers are looking for ways to differentiate their products on the shelf. This increasingly goes beyond color to include embellishment options such as foils, special varnishes, soft touch finishes, and more. Designers are also using more intense solid colors, fluorescents and iridescents, and not just with conventional print. Digital solutions allow more variation in packaging and the ability to address shorter runs and faster cycle ti...

Posted June 04, 2020 by Ray Cheydleur

As digital printing continues to grow, many printmakers are moving beyond traditional media to create artwork on substrates like wood, acrylic, textiles, and backlit materials. While the results can be beautiful, achieving exceptional print quality on these materials can be challenging.   Enter the i1Pro 3 Plus. With its large aperture, polarization and transmissive capabilities, this new member of X-Rite’s i1Pro Family can create color profiles for substrates that are otherwise ...

Posted May 20, 2020 by X-Rite Color

G7™ is a proof-to-print process control method that allows you to reliably and efficiently match the visual appearance of the output from multiple printing devices. It works by defining the gray balance and NPDC curves in conjunction with the traditional method of measuring tonal value increase (TVI/dot gain) for each color. G7 can be applied to any type of printing, regardless of the type of ink or printing method, including all types of digital, offset, flexo, gravure printing.   It...

Posted February 27, 2020 by Mark Gundlach

Although digital printing has been around for many years, the industry is undergoing dramatic changes. On the plus side, digital print technologies utilize more durable inks and offer higher reliability, longer print life, and overall cost savings and efficiency. But these changes also mean print shops must adjust the way they operate to remain competitive.   According to Allied Market Research, the digital textile printing market is expected to reach almost $4 million globally by 2022...

Posted January 23, 2020 by Ray Cheydleur

Over the last few years, we have heard a lot about the circular economy and omnichannel marketing. While each is a trend in their own right, they are quickly converging on the print industry. To be successful in 2020, commercial printers will need to offer a wide range of print capabilities while demonstrating a commitment to sustainability and reducing waste.   The Importance of Circular Economy and Omnichannel In a circular economy, the goal is to eliminate waste and maximize the con...

Posted December 19, 2019 by Ray Cheydleur

Printing using extended gamut process colors allows for a broader color gamut – CMYK PLUS Orange, Green and Violet. By adding these three additional base inks into the process, you can achieve a much closer match to traditional formulated spot ink colors. For example, orange will look truer and cleaner when orange ink is used, rather than mixing yellow and magenta to achieve a suitable match. Read more about how the PANTONE® EXTENDED GAMUT Guide helps printers here. Good: CMYK &nb...

Posted February 09, 2018 by Mark Gundlach

The Pantone Color Institute just announced PANTONE® 18-3838 Ultra Violet as the Pantone Color of the Year 2018! This news is always exciting because it sets the stage for upcoming trends for everything from housewares to fashion to packaging design. In fact, we have already seen shades of Color of the Year used in packaging and graphic design by forward-looking brands in the CPG, luxury, and beauty worlds as well as by personalities and artists seeking to stand out. Part of butt...

Posted December 11, 2017 by Mark Gundlach

Did you read our blog: Are You Using The Right Tolerancing Method? If not, check it out. Today we’re taking the topic one step further to investigate how tolerances are chosen in different industries. A pass-fail tolerance is the amount of color variation that is considered commercially acceptable. In part, tolerances are driven by customer expectations. While color tolerances are very tight in the automotive, plastics, and paint & coatings worlds, they can be much less strict in other...

Posted May 02, 2017 by Mike Huda

In a perfect world, you should be able to put ink in the press and simply run a job. Unfortunately, every year flexo and gravure printing operations waste ink, substrate and press time trying to get color right. Although advancements in technology have made it easier to achieve color accuracy, the variables that affect color still exist. In this three-part series, we’re sharing over two dozen reasons your color might be wrong on press. We’ve already covered two important factors &nda...

Posted April 19, 2017 by Scott Harig

If you didn’t catch my Industry 4.0: What Commercial Printers Need to Know article, you’ll want to check it out now. Today’s blog is a continuation, touching on the most interesting color management tie-ins: PQX, iccMAX, mobile control and new materials. Here’s what on the horizon for color-managed workflows. Image courtesy of Esko.com. Print Quality eXchange PQX was a global effort developed by Idealliance, and is now moving to ISO to be issued as a standard. It is the first of two parts ...

Posted January 25, 2017 by Ray Cheydleur
View more

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042