Nous contacter: +1 (888) 800-9580
Maintenance : La maintenance de notre site Internet est prévue le 16 août de 20h30 à 22h30 (EDT). Des interruptions sont possibles et pourraient affecter votre navigation ainsi que les services en ligne. Nous vous remercions de votre compréhension.


Configuration following a Reset - 500 Series

The following table lists the operational status of a 500 series instrument following a reset. The data listed is specific to the 530. All other models are a subset of this unit. If you operate another of the 500 series instrument family (eg., 508) then certain of table's values do not apply.
BAUD RATE9600
HAND SHAKINGNone
PROTOCOLSRCI
ECHO SETTINGSNone
BEEPER TONEHigh
DELIMITERCarriage Return and Line Feed (CRLF)
SEPARATORComma
POWER DOWN TIME120 seconds
DECIMAL PRECISION2
SHOW DECIMALYES
SHOW DATA LABELSN0
AUTO TRANSMITOFF
ECHO SETTINGSOFF
PATCH SMARTSON
ORIENTATIONLeft Handed
POLARIZATIONOFF
DENSITY FUNCTIONEnabled
DOT FUNCTIONEnabled
COLOR FUNCTIONEnabled
TRAP FUNCTIONEnabled
PRINT CONTRAST FUNCTIONEnabled
HUE GRAYNESS FUNCTIONEnabled
PAPER INDICES FUNCTIONEnabled
COMPARE FUNCTIONEnabled
EFS FUNCTIONEnabled
CONFIGURATIONEnabled
CALIBRATION ALERTEnabled
TIME FORMAT12 hour
DATE FORMATMM/DD/YY
DECIMAL SEPERATORPeriod
LOCALEEnglish
LAB METHODCIE
LCH METHODLCh(ab)
COLOR PRECISIONx10
DENSITY PRECISIONLOW
DENSITY NEWSOFF
DENSITY REFERENCE MODEAuto
DENSITY REFERENCE SEQUENCESequential
NEWS DENSITY 3 COLOR VS BALANCE3 COLOR
DENSITY COLOR SELECTIONAuto
COLOR METRICLab
COLOR REFERENCE SELECTION MODEAuto
COLOR REFERENCE SEQUENCESequential
DOT REFERENCE #125.0; ENABLED
DOT REFERENCE #250.0; ENABLED
DOT REFERENCE #375.0; ENABLED
N-FACTOR1.000
N-FACTOR MODEDisabled
DOT COLOR SELECTIONAuto
DOT GAINDisabled
TRAP FORMULAPreucil
TRAP REFERENCEDisabled
PRINT CONTRAST REFERENCEDisabled
PRINT CONTRAST COLOR SELECTIONAuto
EFS OVERPRINT MODETrap
EFS REF 3 MODEDot
DENSITY STATUST
ILLUMINANT OBSERVERD50/2
DE METHODDeltaE L*a*b*
MINUS PAPERDisabled


Des questions ? Besoin d’un devis ? Nous contacter.  (888) 800-9580