Installation Instructions

Installation

Please read these instructions before using your vipFLEX2:1. Install the PlateQuality Flexo application software onto your PC. The software can be found on the vipFLEX2 application CD.

2. Insert the dongle into a free USB port (if the USB dongle is not connected, the software will start in a demo mode).

3. Connect the vipFLEX2 measuring device to your computer using the USB cable (the vipFLEX2 will not function if it is connected to a USB HUB without a separate power supply).

4. Launch the PlateQuality Flexo application software on your PC.

5. When launching for the first time, the PlateQuality Flexo software will ask for the calibration code and the serial number of the vipFLEX2 measuring device, as well as the serial number and expiration date of the vipFLEX2 Target. The device data can be found on the rear of the vipFLEX2 measuring device; the data of the vipFLEX2 Target can be found on the vipFLEX2 Target.

Haben Sie Fragen? Wünschen Sie ein Angebot? Kontakt(888) 800-9580