First Time Measurements - Getting Started

Measuring:

1. Launch the PlateQuality Flexo software. If the vipFLEX2 measuring device is detected correctly, the video preview will be started automatically, otherwise click on the Preview button.2. Select the substrate type (film, plate, print) on the vipFLEX2 measuring device. The substrate type currently selected will be indicated by an LED. Details on the substrate type can be found in the help of the PlateQuality Flexo software.

3. In the software program, select the substrate type being used.

4. Place the measurement sample onto the measurement table above the measuring aperture.

5. Press the measuring arm onto the sample (the measuring arm will then press down automatically). Then release the measuring arm to ensure that an even pressure is being exerted on the measuring sample during the measurement.

6. Click the Analyze button (or F3) to conduct an automatic measurement.

NOTE: More details on conducting measurements can be found in the help of the PlateQuality Flexo software.

Haben Sie Fragen? Wünschen Sie ein Angebot? Kontakt(888) 800-9580