Contact Sales/Support: +1 (888) 800-9580

500 series default settings

As shipped from the factory (or following a reset), the following is true of all 500 series Spectrodensitometers:

Density

Default Factory Settings Possible Options
Density Color = Auto All, Auto, V, C, M, Y
Density Mode = Absolute Absolute or - Paper
Reference = Auto Auto, 1..16
Status  = T T, A, E, G, Ax, Tx', Ex, I, HIFI
Precision (X10) = Normal Normal or High

Serial Port

Default Factory Settings Possible Options
Baud Rate = 9600 300..57600 baud
Hardware Handshake = Off  Off, Xon, CTS, Busy,
Auto XMT = Off On-With Status, On-No Status, Spreadsheet, Off
Field Separator = Comma Space, Comma, Tab, 'CR', 'CRLF','LF'
Field Delimiter = CRLF 'CR', 'CRLF', 'LF'
Protocol = RCI RCI or ICP
Emulation = Normal Normal or 400 Series

Color

 

Default Factory Settings Possible Options
Color Space = L*a*b* L*a*b*, L*C*h, L*u*v*, Y u*v*, Reflectance (530 only)
Delta E Method = Lab CMC, Lab, or CIE94
Observer Angle = 2 2 or 10
Reference = Auto Auto, 1..16
Illuminate = D50 D50, D55, D65, D75, F2, F7, F11, F12, A, C
Lab Method = CIE CIE or Hunter
LCh Method = LCh (ab) LCh (ab) or LCh (uv)
CMC Tolerancing = 2:1 Lightness: 0.01 to 9.99 Chromaticity: 0.01 to 9.99
CIE94 Tolerancing = 2:1 Lightness: 0.01 to 9.99 Chromaticity: 0.01 to 9.99
Precision (X10) = Normal Normal or High

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042