Simple Communication Test for Instruments

Instrument is not communicating with the software

If your instrument is not communicating with the PC, a good first
step in identifying the issue is to do the following:

1. If available, replace the communications cable going from the    
    instrument to the PC and test connectivite by performing a calibration
    of the instrument through the software.

2. If you have other instruments that connect to PC (with known working
    com port), connect the instrument to that PC and perform a
    calibration of the instrument through the software.

 

¿Tiene preguntas? ¿Necesita un presupuesto? Contáctenos(888) 800-9580