iQC/iMatch SCI to SCE

In order to view both SCI ( Specular Included ) and SCE ( Specular Excluded ) data with a sphere instrument in I Control a change needs to be made to the calibration mode of the sphere device. If you go to Spectro menu and pick Select Mode the mode screen will open. You need to modify each mode you desire to observe the data switch in. At the bottom of the mode configuration screen their is an option for additional date modes. From the drop down menu you need to select SCI/SCE. Then Click ok.

Now the system is capable of displaying both sets of data for all measurements made after this change is applied.

 
Now if you measure standards or trials you can right click the measurements in the treeview, you can select use extended data for calcualtions. This will display the SCE data.   
 

¿Tiene preguntas? ¿Necesita un presupuesto? Contáctenos(888) 800-9580