EasyTrax Specifications
Specifications for EasyTrax| General: | |
| Press Console Sizes: | 20” (51 cm), 26” (66 cm), 29” (74 cm), 32” (81 cm), 40” (102 cm) |
| Scanning Area: | Up to 40” (102 cm) |
| Scanning Speed: | 150 mm / sec. for 5 mm x 5 mm patches |
| Patch Size (min): | 3.8 mm x 4 mm |
| Color Bar: | Comes with pre-defined color bars or use custom color bar with the advanced Editors |
| Density Repeatability: | Black density ± 0.02D @ 1.5D/White density ± 0.01D |
| Spectral Repeatability: | 0.20 dE00 on white tile |
| Density Range: | 0 – 2.5D |
| Spectral Range: | 400nm – 700nm |
| Reflectance Range: | 0 – 150% Reflectance |
| Density Accuracy: | ± 0.02D at 1.5D |
| Density Status: | E/T |
| Colors Supported: | Up to 8 colors w/G7 & ISO option (basic Density and Spectral system supports 6 colors) |
| Inter-instrument Agreement: | 0.5 dE00 Average, 1.0 dE00 Max. |
| Illumination: | Gas pressure lamp |
| Polarization: | Polarized head reads polarized density and un-polarized color. |
| Paper Thickness: | 0.1 mm Min., 1.5 mm Max. |
| Communication Port: | Ethernet |
| External Power Supply | |
| Input Requirement: | 100-240VAC, 50/60Hz 0.8A LPS |
| Instrument Power Required: | 24VDC @ 1.2 A |
| Environmental | |
| Operating Temp: | +10°C (50°F) to +40°C (104°F), 85% RH non-condensing |
| Storage Temp: | -40°C (-40°F) to +70°C (158°F) |
| Usage: | Indoor Only |
| Altitude: | 2000m |
| Pollution Degree: | 2 |
| Transient Overvoltage: | Category II |
