Configuring Tool Crib to Connect to a VeriColor Spectro

  1. Launch Tool Crib and select "Generic" from the instrument list.
  2. Click on "GO".

    Generic
     
  3. Set the Instrument connection parameters to:
    • RCI,
    • Serial,
    • The correct com port (the com port being used to physically connect the Hub Solo or Spectro to the PC),
    • Set the Baud Rate to 115,200 for VeriColor Spectro and click "Connect".

      RCI
       
  4. The following screen will appear and you will be ready to test your connection.

    Connect

Need a Quote? Contact Sales(888) 800-9580

Technical Questions? Contact Support(888) 826-3042