Nous contacter: +1 (888) 800-9580

Configuring Tool Crib to Connect to a VeriColor Spectro

  1. Launch Tool Crib and select "Generic" from the instrument list.
  2. Click on "GO".

    Generic
     
  3. Set the Instrument connection parameters to:
    • RCI,
    • Serial,
    • The correct com port (the com port being used to physically connect the Hub Solo or Spectro to the PC),
    • Set the Baud Rate to 115,200 for VeriColor Spectro and click "Connect".

      RCI
       
  4. The following screen will appear and you will be ready to test your connection.

    Connect

Des questions ? Besoin d’un devis ? Nous contacter.  (888) 800-9580