| Notes : | The Thinkjet MUST be configured for Epson emulation. Select the Epson Preset from the I/O configuration menu. Ensure that both the mode DIP switches and the serial DIP switches are properly set on the printer. Switches are located on the back of the printer.
| Epson Presets | | Baud = | 9600 | | Pin5 = | CTS | | Format = | NEW | | rci = | off | | Dec.Pt. = | ON | | CR = | CRLF | | comp = | off | | Xmit = | Manual | | Width = | Full | | | | | Mode DIP Switches - HP Thinkjet | | Number | Description | | 1 OFF | Don't care | | 2 OFF | No preference | | 3 OFF | | | 4 OFF | Page length = 11" | | 5 ON | Epson/IBM mode | | 6 ON | USA character set | | 7 OFF | | | 8 OFF | | | | | | Serial DIP Switches - HP Thinkjet | | Number | Description | | 1 ON | Handshake = DTR | | 2 OFF | 8 Bit word no parity | | 3 OFF | | | 4 OFF | 9600 baud | | 5 OFF | |
|