Scanning Test Charts and taking Measurements with ColorMunki Photo or ColorMunki Design

Scanning Test Charts and taking Measurements with ColorMunki Photo or ColorMunki Design
  1. Make sure Target Flag is locked while scanning.
  2. Start by placing the device on the test chart. Make sure the measurement aperture (Directly below the indicator lamp) is positioned on the white area of the paper at the beginning of the row.

  3. Press the Button.

  4. Scan the row by gliding the ColorMunki over row using gentle pressure.

  5. Continue gliding the ColorMunki until the measurement aperture is positioned over the white area beyond the last patch in the row.

  6. Release the Button.

Questions? Need a Quote? Contact Us.  1.800.248.9748