|Application :||Epson Stylus 740|
|Platform :||Parallel Printer|
|Cabling :||SE130-SERPAR (RJ45 to Centronics cable)|
|Notes :||This Epson printer is a PARALLEL device! A serial to parallel converter must be used! The above cable satisfies this requirement. Note that the "SERPAR" converter operates at a fixed baud rate of 9,600!
The 391 requires Epson "ESC/P2" printer language. In newer 391's this option is accessed by using the "CANON2" I/O preset. If your 391 has the "CANON2" I/O preset, select it now. Older 391's will not have a "CANON2" preset. For these units use the "EPSON" I/O preset. In this last case, the graphs may slightly exceed the size of an 8.5 x 11 inch sheet. If this is not acceptable contact X-Rite Customer Service to secure a firmware upgrade.
Per notes from the Epson website (9/8/00), there are several sources that still carry this printer as a stock item. See below:
MULTIPLE ZONES INTERNATIONAL, INC.
PC CONNECTION SERVICES
CDW COMPUTER CENTERS, INC.
Note that this document was originally posted to another instrument in August of 1999 - jgm.
|The support number for Epson is...||800-922-8911|
|The WebSite for Epson is...||http://www.epson.com/|