Model #: 361t
361T
Densitometer
Out of Production
The 361T Tabletop Transmission Densitometer from X-Rite is ideal for linearizing imagesetters, adjust exposure and performing processor quality control in film processing.
Overview
Specifications
Training and Support
Accurately Measure Density on Film
The X-Rite 361T Tabletop Transmission Densitometer is ideal for film-based workflows, and is used to measure both density (up to 6.0D) and dot area. Use the 361T to linearize imagesetters, adjust exposure, perform processor quality control, and verify duplicated or contacted films. UV mode measures film base fog and evaluates diazo films.
Benefits:
- Standard apertures of 1mm, 2mm and 3mm offer flexibility in measurement areas.
- Measure both negative and positive percent dot area.
- Includes both Ortho and UV densitometer responses.
- Includes cable interface for transmitting dot area readings to computers.
Specifications
| Short Term Repeatability - Density | Ortho,Visual (2 mm and 3 mm aperture):
0.0 D to 5.0 D: ± 0.01 D
5.0 D to 5.5 D: ± 2 %
5.5 D to 6.0 D: ± 3 %
Ortho,Visual (1 mm aperture):
0.0 D to 4.5 D: ± 0.01 D
4.5 D to 5.0 D: ± 1 %
UV (3 mm aperture):
0.0 D to 3.5 D: ± 0.01 D
3.5 D to 4.0 D: ± 1 % |
|---|---|
| Measurement Geometry | Per ANSI PH 2.19, ISO 5/2 |
| Inter-Instrument Agreement | 0.0 D - 5.0 D: ± 0.02 D, ± 2 % |
| Linearity | Ortho,Visual (2mm and 3mm aperture):
0.0 D to 5.0 D: ± 0.02 D
5.0 D to 5.5 D: ± 1%
5.5 D to 6.0 D: ± 2%
Ortho,Visual (1mm aperture):
0.0 D to 4.5 D: ± 0.02 D
4.5 D to 5.0 D: ± 1 %
UV (3mm aperture):
0.0 D to 3.5 D: ± 0.02 D
3.5 D to 4.0 D: ± 1 % |
| Aperture | 1mm, 2mm and 3mm
(0.5mm optional) |
| Humidity | ≤ 76% |
| Operating Temperature Range | 10°C to 40°C
50°F to 104°F |
| Storage Temperature Range | '-20° to 50°C
-4° to 122°F |
| Dimensions (length, width, height) | 43.5 cm x 33.0 cm x 15.2 cm
17.1" x 13.1" x 6.0" |
| Weight | 8.63 kg
19 lbs. |
| Shipped Weight | 17.5 kg
7.95 lbs. |
| Communication Interface | RS-232 serial interface |
| Instrument Display | 8 character LCD |
| Voltage | 90 - 130 VAC 50 - 60 Hz
120 - 260 VAC 50 - 60 Hz |
| Warm Up Time | 2 minutes
5 minutes (UV) |
| Wattage | 80 VA max. |
| Density Range | 0.0 D to > 6.0 D
0 % to 100 % |
| Density Standards | X-Rite Visual, X-Rite Ortho, X-Rite UV |
| Industry Standards | ISO 5-2, ANSI PH2.19 |
| Warranty | 1 year |
